Turboflocker™ - flock spraying equipment

  1. Home
  2. Turboflocker™ - flock spraying equipment
Turboflocker™ blown electrostatic flock spraying equipment

The Turboflocker™ is a blown electrostatic system that delivers an easily adjustable steady stream of charged flock. It is suitable for flocking into profiles and pockets in addition to external surfaces. £5,995 + vat

The flocking of objects which have deep recesses or sharp angles has always created problems for flock coaters. This is the result of the Faraday Cage effect where the electrostatically charged fibres are attracted to the nearest earthed surface which stops them reaching into cavities. To overcome this problem a pneumatic or blown electrostatic flocking system is required. The Turboflocker™ is a blown electrostatic system that delivers an easily adjustable steady stream of charged flock. It is suitable for flocking into profiles and pockets in addition to external surfaces. The standard system comes complete and ready to go. The process parameters can be set very quickly. An optional hand held hopper for electrostatic only applications is available.

 

 

 

Turboflocker™ Specification

  • The system consists of the main process unit and applicator gun.
  • The main process unit is self contained and mounted on sturdy locking castors.
  • The flock hopper unit holds up to 6kg of flock, but will successfully operate with as
    little as 100gm of flock.
  • The high voltage generator has a fully adjustable output of up to 80kV. The generator
    will supply up to 240uA.
  • The flock delivery unit sieves the flock before delivering it to the gun via the delivery
    hose. Different sieve sizes are available to suit the flock length used.
  • The automatic stirrer ensures uninterrupted flock flow to the sieve.
  • Independent controls allow the flock delivery, air flow and electrostatic charge to be
    adjusted to suit the application and required work rate.
  • A selection of nozzles is available for the gun to facilitate differing spray patterns to
    suit various applications.
  • The flock hopper and panels are manufactured from stainless steel.
  • The main unit allows non blown hand held applicators or flock chambers to be
    connected to the generator.
  • The main process unit measures 800W x 600D x 900T and is available for 110V or
    220/240V operation.

 

Buy